Outside Radius Starter
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″
Use: Starters are needed on radius less than 6′ on 11-5/8″ units and less than 4′ radius on 8″ units.
Outside Radius starter
Dimensions: 3-1/2″
7-5/8″, 8″, 11-5/8″
Wall coping rowlock
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″
7-5/8″, 8″, 11-5/8″
outside radius
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ (Dependent on radius)
Customer’s Choice *and up to 12′ for 11-5/8″ units.
Ends under 6′ radius will be slanted for units under 8″. Ends under 8′ radius will be slanted for units under 11-5/8″
Inside Radius Starter
Dimensions: 2 1/4″, 2 3/4″, 3 1/2″, 3 5/8″
Required on 6′ or less radius on 11 5/8″ units and 4′ or less radius on 8″ units
Inside Radius
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″
To Suit Radius
sloped sill s-2 external corner
Dimensions: 3-1/2″, 3-1/2″
SLOPED SILL S-2 Internal CORNER
Dimensions: 3-1/2″, 3-1/2″
Sloped Sill S-2 Internal Corner
Dimensions: 3-1/2″ 3-1/2″
Sloped Sill S-2
Dimensions: 2-1/4″, 2-3/4″, 3-5/8″
7-5/8″, 8″
Sloped Sill
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″
Water Table W-4 Cove External Corner
Dimensions: 2-1/4″, 7-5/8″, 8″
Water Table W-4 Cove Internal Corner
Dimensions: 2-1/4″ 3-1/2″
Water Table W-4 Cove Header
Dimensions: 2-1/4″ 7-5/8″, 8″
Water Table W-4 Cove Stretcher
Dimensions: 2-1/4″ 7-5/8″, 8″
Water Table W-3 Sloped External Corner
Dimensions: 2-1/4″, 2-3/4″ 3-1/2″
Water Table W-3 Sloped Internal
Dimensions: 2-1/4″, 2-3/4″ 3-1/2″
Water Table W-3 Sloped Stretcher
Dimensions: 2-1/4″, 2-3/4″ 7-5/8″, 8″
Water Table W-3 Sloped Header
Dimensions: 2-1/4″, 2-3/4″ 7-5/8″, 8″ 3-1/2″, 3-5/8″, 3-3/4″, 4″
Water Table W-2 External Corner
Dimensions: 3-1/2″, 3-5/8″ 7-5/8″, 8″
Water Table W-1 Internal Corner
Dimensions: 3-1/2″, 3-5/8″
Water Table W-1
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″ 3-1/2″, 3-5/8″
Soap
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″, 15-5/8″
Splay Angle
Dimensions: 2-1/4″, 2-3/4″, 3-5/8″ 7-5/8″, 8″, 11-5/8″
Roundnose Stretcher
Dimensions: 2-1/4″ 7-5/8″, 8″
Roundnose Coping
Dimensions: 2-1/4″ 7-5/8″, 11-5/8″ 3-1/2″, 3-5/8″, 3-3/4″, 4″
Ogee Coping
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 11-5/8″ 3-1/2″, 3-5/8″, 3-3/4″, 4″
Lip Stretcher corner
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″
Lip Stretcher
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″, 15-5/8″
Lip Soldier
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″, 15-5/8″
External Corner 90°
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″
Customer’s Choice up to 5 5/8″
External Octagon
Dimensions: 2-1/4″, 2-3/4″, 3-5/8″, 3-1/2″ 5-5/8″, 6-5/8″, 7-5/8″ 1-5/8″, 2-5/8″, 3-5/8″
Double Bullnose Wall Cap
Dimensions: 2-1/4″, 2-3/4″, 3-1/4″, 3-5/8″ 7-5/8″, 8″
Internal Octagon 135°
Dimensions: 2-1/4″, 2-3/4″, 3-5/8″, 3-1/2″ 5-5/8″, 6-5/8″, 7-5/8″ 1-5/8″, 2-5/8″, 3-5/8″
Double Bullnose Corner
Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″
Double Bullnose End Cap
Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″ 3-1/2″
Bullnose
Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8, 8″
Bullnose Outside Stretcher
Dimensions: 2-1/4″ 7-5/8″, 8″
Bullnose Header
Dimensions: 2-1/4″ 7-5/8″, 8″
Bullnose Inside Corner #1
Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 3-1/2″
Bullnose Outside Corner #1
Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 3-1/2″, 8″
Bullnose Inside Corner #2
Dimensions: 2-1/4″, 3-1/2″*, 3-5/8″ 7-5/8″*, 8″*
Bullnose Outside Corner #2
Dimensions: 2-1/4″, 3-1/2″*, 3-5/8″ 7-5/8″*, 8”*
