Urban Brick Shapes

Outside Radius Starter

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″

Use: Starters are needed on radius less than 6′ on 11-5/8″ units and less than 4′ radius on 8″ units.

Outside Radius starter

Dimensions: 3-1/2″

7-5/8″, 8″, 11-5/8″

Wall coping rowlock

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″

7-5/8″, 8″, 11-5/8″

outside radius

 

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ (Dependent on radius)

Customer’s Choice *and up to 12′ for 11-5/8″ units.

Ends under 6′ radius will be slanted for units under 8″. Ends under 8′ radius will be slanted for units under 11-5/8″

Inside Radius Starter

Dimensions: 2 1/4″, 2 3/4″, 3  1/2″, 3 5/8″

Required on 6′ or less radius on 11 5/8″ units and 4′ or less radius on 8″ units

Inside Radius

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″

To Suit Radius

sloped sill s-2 external corner

Dimensions: 3-1/2″, 3-1/2″

SLOPED SILL S-2 Internal CORNER

Dimensions: 3-1/2″, 3-1/2″

Sloped Sill S-2 Internal Corner

Dimensions: 3-1/2″ 3-1/2″

Sloped Sill S-2

Dimensions: 2-1/4″, 2-3/4″, 3-5/8″

7-5/8″, 8″

Sloped Sill

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″

Water Table W-4 Cove External Corner

Dimensions: 2-1/4″, 7-5/8″, 8″

Water Table W-4 Cove Internal Corner

Dimensions: 2-1/4″ 3-1/2″

Water Table W-4 Cove Header

Dimensions: 2-1/4″ 7-5/8″, 8″

Water Table W-4 Cove Stretcher

Dimensions: 2-1/4″ 7-5/8″, 8″

Water Table W-3 Sloped External Corner

Dimensions: 2-1/4″, 2-3/4″ 3-1/2″

Water Table W-3 Sloped Internal

Dimensions: 2-1/4″, 2-3/4″ 3-1/2″

Water Table W-3 Sloped Stretcher

Dimensions: 2-1/4″, 2-3/4″ 7-5/8″, 8″

Water Table W-3 Sloped Header

Dimensions: 2-1/4″, 2-3/4″ 7-5/8″, 8″ 3-1/2″, 3-5/8″, 3-3/4″, 4″

Water Table W-2 External Corner

Dimensions: 3-1/2″, 3-5/8″ 7-5/8″, 8″

Water Table W-1 Internal Corner

Dimensions: 3-1/2″, 3-5/8″

Water Table W-1

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″ 3-1/2″, 3-5/8″

Soap

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″, 15-5/8″

Splay Angle

Dimensions: 2-1/4″, 2-3/4″, 3-5/8″ 7-5/8″, 8″, 11-5/8″

Roundnose Stretcher

Dimensions: 2-1/4″ 7-5/8″, 8″

Roundnose Coping

Dimensions: 2-1/4″ 7-5/8″, 11-5/8″ 3-1/2″, 3-5/8″, 3-3/4″, 4″

Ogee Coping

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 11-5/8″ 3-1/2″, 3-5/8″, 3-3/4″, 4″

Lip Stretcher corner

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″

Lip Stretcher

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″, 15-5/8″

Lip Soldier

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″, 15-5/8″

External Corner 90°

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″

 

Customer’s Choice up to 5 5/8″

External Octagon

Dimensions: 2-1/4″, 2-3/4″, 3-5/8″, 3-1/2″ 5-5/8″, 6-5/8″, 7-5/8″ 1-5/8″, 2-5/8″, 3-5/8″

Double Bullnose Wall Cap

Dimensions: 2-1/4″, 2-3/4″, 3-1/4″, 3-5/8″ 7-5/8″, 8″

Internal Octagon 135°

Dimensions: 2-1/4″, 2-3/4″, 3-5/8″, 3-1/2″ 5-5/8″, 6-5/8″, 7-5/8″ 1-5/8″, 2-5/8″, 3-5/8″

Double Bullnose Corner

Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″

Double Bullnose End Cap

Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 7-5/8″, 8″, 11-5/8″ 3-1/2″

Bullnose

Dimensions: 2-1/4″, 2-3/4″, 3-1/2″, 3-5/8″ 7-5/8, 8″

Bullnose Outside Stretcher

Dimensions: 2-1/4″ 7-5/8″, 8″

Bullnose Header

Dimensions: 2-1/4″ 7-5/8″, 8″

Bullnose Inside Corner #1

Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 3-1/2″

Bullnose Outside Corner #1

Dimensions: 2-1/4″, 3-1/2″, 3-5/8″ 3-1/2″, 8″

Bullnose Inside Corner #2

Dimensions: 2-1/4″, 3-1/2″*, 3-5/8″ 7-5/8″*, 8″*

Bullnose Outside Corner #2

Dimensions: 2-1/4″, 3-1/2″*, 3-5/8″ 7-5/8″*, 8”*